Description:

***SEE ATTACHED FOR FULL TEXT NOTICE***

This is a SOURCES SOUGHT NOTICE / REQUEST FOR INFORMATION; not a pre-solicitation notice or solicitation for proposals/quotations.

The applicable NAICS Code is 336611, Ship Building and Repairing, and the size standard is 1,300 employees.

REQUIREMENT:  This notice is issued by the U.S. Coast Guard, Surface Forces Logistics Center, and Alameda, CA to identify sources capable of providing the following:  Contractor shall provide all necessary labor, materials, services, equipment, supplies, power, accessories, special tools and such other things as are necessary to perform DRYDOCK maintenance to the U.S. Coast Guard Cutter, USCGC CYPRESS (WLB-210) FY25  a 225’ buoy tender. 

This requirement is for a vessel that is homeported in Coast Guard District 17. It is anticipated that this requirement will be solicited in accordance with NDAA FY 2021 Section 8820, Shipyard Provision, Section 8220, VESSEL CONVERSION, ALTERATION, AND REPAIR PROJECTS.

SEC. 8220. VESSEL CONVERSION, ALTERATION, AND REPAIR PROJECTS.

(a) IN GENERAL.—Notwithstanding any provision of the Small

Business Act (15 U.S.C. 631 et seq.) and any regulation or policy

implementing such Act, the Commandant may use full and open

competitive procedures, as prescribed in section 2304 of title 10,

United States Code, to acquire maintenance and repair services

for vessels with a homeport in Coast Guard District 17.

(b) APPLICABILITY.—Subsection (a) shall apply only if there

are not at least 2 qualified small businesses located in Coast Guard

District 17 that are able and available to provide the services

described in such subsection.

(c) LIMITATION.—The full and open competitive procedures

described in subsection (a) may only be used to acquire such services

from a business located in Coast Guard District 17 that is able

and available to provide such services.

USCGC CYPRESS (WLB-210) DRYDOCK AVAILABILITY FY2025.

ANTICIPATED NAICS CODE/SIZE STANDARD: The applicable NAICS Code is 336611, Ship Building and Repairing and the size standard is 1,300 employees.

GEOGRAPHICAL RESTRICTION:

N/A

PLACE OF PERFORMANCE: Contractor’s Facility in Alaska

DESCRIPTION OF WORK:

This requirement is for the contractor to provide all necessary facilities, materials, equipment, personnel, and other such things necessary to perform Dry-dock repairs to the U.S. Coast Guard Cutter (USCGC) CYPRESS (WLB-210), a 225 foot Seagoing Buoy Tender. This vessel’s homeport is at Chiniak Hwy, Kodiak AK 99615. All work is to be performed at the Contractor’s facility. The required performance period is 99 days. The performance period is 08 September 2025 – 16 December 2025 to accommodate Coast Guard cutter operational needs.

Description: This Dry Dock will consist of approximately One Hundred and Seventeen (117) work items, hull plating ultrasonic testing, underwater body preserve, propeller removal and inspect, propulsion shaft removal, inspect, and reinstall, rudders remove, inspect, reinstall and preserve, construction deck 100% preserve, tanks clean and inspect, and boat davit inspect. This is not a new requirement. This is required maintenance.

ITEM

DESCRIPTION

D-001

Fire Prevention Requirements

D-002

Hull Plating, U/W Body, Inspect

D-003

Hull Plating, U/W Body, Ultrasonic Testing

D-004

Hull Plating, Freeboard, Ultrasonic Testing

O-005

U/W Body, Preserve, 100 percent

D-006

U/W Body, Preserve, Partial, Condition A

O-007

U/W Body, Preserve, Partial, Condition B

O-008

U/W Body, Preserve, Partial, Condition C

O-009

Hull Plating Freeboard, Preserve, Partial

D-010

Appendages, U/W, Leak Test

D-011

Propulsion Shaft Fairwaters And Rope Guards, Inspect

D-012

Appendages, U/W, Internal, Preserve

D-013

Chain Lockers, Clean and Inspect

D-014

Voids, Non-Accessible, Leak Test

D-015

Voids, Non-Accessible, Internal Surfaces, Preserve

D-016

Tanks, MP Fuel Service, Clean and Inspect

D-017

Tanks, Potable Water, Clean and Inspect

D-018

Tanks, Ballast, Clean and Inspect

D-019

Voids, Accessible, Clean and Inspect

D-020

Tanks, Dirty Oil and Waste, Clean and Inspect

D-021