Description:

General Requirements

1. SCOPE  

1. 1. Intent. This standard specification invokes general requirements for conducting vessel repairs performed by commercial contractors at a Coast Guard facility for Coast Guard vessels.  

1. REFERENCES  

COAST GUARD DRAWINGS  

Coast Guard Drawing 26B-CB-IV-801-001, Rev -, Booklet of General Plans

Coast Guard Drawing 35-LRI-II-801-001, Rev -, General Arrangement

Coast Guard Drawing 418A-WMSL 801-001, Rev A, Booklet of General Plans

Coast Guard Drawing 750-WMSL-320-579, Rev -, Electrical Installations Iwo New Aft Folding Cranes

Coast Guard Drawing 750-WMSL-583-508, Rev -, Installations IWO Aft Folding Cranes

Coast Guard Fleet Drawing FL-1702-11, Rev -, Inspection of Sheaves

COAST GUARD PUBLICATIONS  

Coast Guard Technical Publication (TP) 7903, SWBS 583, Oct 2021, Aft Boat Handling System –Model FB90-28

Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2022, General Requirements

Surface Forces Logistics Center Standard Specification 5000 (SFLC Std Spec 5000), 2022, Auxiliary Machine Systems

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2022, Requirements for Preservation of Ship Structures

OTHER REFERENCES  

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.11 (SSPC-SP 11), 2020, Power Tool Cleaning to Bare Metal

3. REQUIREMENTS  

3.1 General. The Contractor must conform to all requirements specified in SFLC Std Spec 0000 and in this item, as applicable, during the performance of this availability. The requirements of this WI apply to all work under the scope of this contract, whether explicitly stated in all following work items or not, and to all other work subsequently authorized by changes, modifications, or extensions to the contract.  

3.2 Materials. The Contractor must obtain all of the materials required to complete this job with the exception of the Government-furnished Property shown in Paragraph 1.2 of Work Item.   

3.3. Period of Performance. The period of performance window for this work starts on 09 April 2025 and ends on 01 July 2025.  

3.4. Location. The Contractor must perform the work while the USCGC MIDGETT (WMSL 757) is alongside the pier on 400 Sand Island Pkwy Honolulu, HI 96819-4326

58310_MLA_0225_418

1. ITEM 1: Folding Boom Cranes, Biennial Maintenance, Perform

1.  SCOPE

1.1 Intent.  This work item describes the requirements for the Contractor to inspect, perform maintenance, and test folding boom cranes listed in Table 1.

TABLE 1 – LIST OF FOLDING BOOM CRANEs

Crane

LOCATION

MANUFACTURER / MODEL NUMBER

coast guard tech pub

Crane No. 2

Main Deck, Port Side, Aft of Frame 95

Appleton Marine Inc. / FB90-28

7903

Crane No. 4

Main Deck, Port Side, Aft of Frame 90

Appleton Marine Inc. / FB90-28

7903

Crane No. 3

Main Deck, STBD Side

Appleton Marine Inc. / FB90-28

7903

1.2 Government-furnished property.
 

MTI

ITEM DESCRIPTION

NSN/PN

QTY

ESTIMATED COST ($/UNIT)

Y

*CB-OTH Mark IV

(Coast Guard Drawing 26B-CB-IV-801-001)

N/A

1 ea.

N/A

Y

*Long Range Interceptor II

(LRI-II) Cutter Boat
(Coast Guard Drawing 35-LRI-II-801-001)

N/A

1 ea.

N/A

2.  REFERENCES

Coast Guard Drawings

Coast Guard Drawing 26B-CB-IV-801-001, Rev -, Booklet of General Plans

Coast Guard Drawing 35-LRI-II-801-001, Rev -, General Arrangement

Coast Guard Drawing 418A-WMSL 801-001, Rev A, Booklet of General Plans

Coast Guard Drawing 750-WMSL-320-579, Rev -, Electrical Installations Iwo New Aft Folding Cranes

Coast Guard Drawing 750-WMSL-583-508, Rev -, Installations IWO Aft Folding Cranes

Coast Guard Fleet Drawing FL-1702-11, Rev -, Inspection of Sheaves

Coast Guard Publications