Page 2 of 2 Q&A Are there any access issues? We have a dock and double doors to bring the batteries in. Any doorways and floor covering needed? No floor protection needed. Are there any stairs or ladders to climb up or down to perform work and or transport batteries? No Is there a loading dock available and what is approximate distance from facility entrance to battery change out area? There is a loading dock. There is nothing stopping you from going from truck to the hall outside the rooms they are in. Is there an elevator that requires a breakdown of each battery pallet before reaching the change out area? No Are there any narrow doorways or hallways (or heavy carpeting) or raised/access floor to transit that would require breakdown of each battery pallet before reaching the change out area? No Is there a battery monitoring system to dis-engage and re-engage and test before job completion? Yes, but it is internal. Is there a forklift, pallet jack or carts available to use? No, can only use pallet jack. 1 room is on the ground floor. 2 rooms are on the first floor. 1 room is on the 2nd floor. The following images have been included to provide more specifications on the UPS machines the replacement batteries will be used for. 1. Room C-136 (1st floor), (40) 12HX400-FR Current UPS: Vertiv Liebert Npower 2. Room B-112 (1st floor), (40) 12HX300-FR Current UPS: Vertiv Liebert Npower 3. Room B-215 (2nd floor), (40) 12HX300-FR Current UPS: Vertiv Liebert Npower 4. Room B-014 (Ground floor), (24) 12HX300-FR Current UPS: Vertiv Liebert EXM